A kosár jelenleg üres!
digitális hang felvevő: 6 csatornás rögzítő DSLR kamerákhoz, SD kártya (64MB-tól 2GB-ig), SDHC kártya ( 4GB-tól 32GB-ig), SDXC kártya (48GB-tól 128 GB-ig), 44.1/48/96 kHz, 16/24-bit, PCM (WAV formátum), BWF, 2 db beépített mikrofon, 4 db XLR bemenet, SMPTE, HDMI in/out, Micro-B USB csatlakozó, USB 2.0, 4db AA elemmel vagy AC adapterrel (nem tartozék) működtethető, méretek: 169 x 57.3 x 113.5 mm, súly: 654 g
Tájékoztatjuk, ha a termék ára az Ön által kitűzött ár alá került.
* Név: | |
* E-mail cím: | |
* Kívánt ár: |
Recording media | SD card(64MB to 2GB), SDHC card(4GB to 32GB), SDXC card(48GB to 128GB) |
Recording format | |
WAV | 44.1k/48k/96k/192k Hz, 16/24-bit |
BWF | 44.1k/48k/96k/192k Hz, 16/24-bit |
Number of input channels | |
44.1k/48k/96k Hz | 4 maximum |
192kHz | 2 maximum |
Number of recording tracks | |
44.1k/48k/96k Hz | 6 maximum |
192kHz | 2 maximum |
Analog audio inputs | *The maximum input level the level that the input knob can be adjusted and a digital full-scale(0dBFS) signal can be input without distorting. *The minimum input level is the level that the input knob can be adjusted and a -20dBFS signal can be input. |
IN 1, IN 2, IN 3, IN 4 | XLR can provide phantom power |
Connectors | XLR-3-31 (1:GND, 2:HOT, 3:COLD) 6.3mm(1/4")standard TRS jacks(tip:HOT, Ring:COLD, Sleeve:GND) |
Input gain | ”LOW”/”MID”/”HI”/”HI+”時 |
Input impedance | 2k ohms |
Phantom power | 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH) |
Maximum input level | +4dBu |
Minimum input level | -72dBu |
MIC input gain | TRIM MAX |
LOW | +20dB |
MID | +40dB |
HI | +52dB |
HI+ | +64dB |
Input gain | "LINE"時 |
Input impedance | 10k ohms以上 |
Nominal input level | +4dBu |
Maximum input level | +24dBu |
EXT IN 1/2 | |
Connector | 3.5mm(1/8")stereo mini jack (can provide plug-in power) |
Input impedance | 10k ohms |
Maximum input level | +10dBV |
Minimum input level | -50dBV |
MIC input gain | TRIM MAX |
LOW | +3dB |
MID | +11dB |
HI | +26dB |
HI+ | +38dB |
IN | |
Connector | 3.5mm(1/8")stereo mini jack |
Input impedance | 10k ohms |
Nominal input level | -10dBV |
Maximum input level | +6dBV |
Analog audio outputs | |
LINE OUT | |
Connector | 3.5mm(1/8")stereo mini jack |
Output impedance | 200 ohms |
Nominal output level | -14dBV |
Maximum output level | +6dBV |
OUT | |
Connector | 3.5mm(1/8")stereo mini jack |
Output impedance | 200 ohms |
Nominal output level | -44dBV |
Maximum output level | +6dBV |
PHONES | |
Connector | 3.5mm(1/8")stereo mini jack |
Maximum output | 50mW + 50mW |
Control inputs/outputs | |
HDMI IN/OUT | |
Connectors | Type A receptacle |
USB | |
Connector | Micro-B |
Format | USB2.0 HIGH SPEED mass storage class |
TIMECODE IN | |
Connector | BNCConnector |
Signal voltage amplitude | 0.5Vp-p to 5Vp-p |
Input impedance | 10k ohms |
Format | SMPTE 12M-1999 compliant |
REMOTE | |
Connector | 2.5mm TRS jack |
Power | 4 AA batteries(Alkaline, NI-MH or lithium), AC adapter(TASCAM PS-P515U, sold separately), External battery pack(TASCAM BP-6AA, sold separately) |
Power consumption | 6.5W(maximum) |
Current consumption (USB bus power) | 1.3A(maximum) |
Battery operation time (continuous operation) | 2ch WAV, 48kHz, 16bit rec *When using phantom power, the operation time might be reduced depending on the mic being used. |
Lithium (Energizer ULTIMATE LITHIUM) |
About 7:30 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected About 6:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected About 3:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i) |
NI-MH batteries (eneloop) |
About 4:00 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected About 2:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected About 2:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i) |
Alkaline batteries (EVOLTA) |
About 3:45 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected About 2:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected About 1:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i) |
DR-701D + BP-6AA | *BP-6AA is using the alkaline batteries (EVOLTA). |
Lithium batteries (Energizer ULTIMATE LITHIUM) |
About 12:30 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected About 7:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected About 5:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i) |
NI-MH batteries (eneloop) |
About 9:30 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected About 7:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected About 4:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i) |
Alkaline batteries (EVOLTA) |
About 9:00 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected About 6:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected About 3:45 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i) |
Dimensions | 169(W)×57.3(H)×113.5(D)mm (with the top adapter attached) |
Weight | 654g (including batteries) / 567g (without batteries) |
Operating temperature | 0˚C to 40˚C |
Standard accessories | USB cable, Camera attachment bracket screw hole covers × 6 Owner's Manual (including warranty) |