PANASONIC PT-DS20K 3-CHIP, DLP rendszer projektor

3-CHIP, DLP rendszer projektor, 20000 lm, SXGA+, 3D, WIRED LAN, 10000:1 kontraszt

19.050.000 Ft

Nettó: 15.000.000 Ft

Kiszállítás: 5 nap
Szállítási költség: 1905 Ft (1500+áfa)

2 év garancia

Kívánságlistához adom

Összehasonlításhoz adom

0 vélemény | Írja meg véleményét

Boltonkénti készlet

1116 Budapest, Kalotaszeg u. 28.

Hitel lehetőség

Csomag ajánlat

Szállítási infok, árak

Fizetési módok

Árváltozás értesítő

Leírás Tulajdonságok (7)

Model			PT-DZ21K	PT-DS20K	PT-DW17K
Power supply			200–240 V AC, 50/60 Hz (Max current requirements: 12 A @200 V)
Power consumption			2,300 W (0.3 W with STANDBY MODE set to ECO,*¹ 9 W with STANDBY MODE set to NORMAL.)
Dissipation BTU			Max. 7,848 BTU/hour (without light output: 7,585 BTU/hour)
DLP™ chip	Panel size		24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)	24.1 mm (0.95 inches) diagonal (4:3 aspect ratio)	21.6 mm (0.85 inches) diagonal (16:9 aspect ratio)
	Display method		DLP™ chip x 3, DLP™ projection system
	Pixels		2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels	1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels	1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels
Lens			Optional powered zoom and fixed-focus lenses
Lamp			465 W UHM lamp x 4, replacement cycle of up to 2,000 hours*²
Screen size (diagonal)			1.78-25.4 m (70-1,000 inches), 1.78–15.24 m (70–600 inches) with the ET-D75LE8, 16:10 aspect ratio	1.78-25.4 m (70-1,000 inches), 1.78–15.24 m (70–600 inches) with the ET-D75LE8, 4:3 aspect ratio	1.78-25.4 m (70-1,000 inches), 1.78–15.24 m (70–600 inches) with the ET-D75LE8, 16:9 aspect ratio
Brightness*³			20,000 lm (four-lamp)		17,000 lm (four-lamp)
Center-to-corner uniformity*³			90%
Contrast*³			10,000:1 (full on/off, with dynamic iris set to “3” )
Resolution			1,920 x 1,200 pixels	1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.)	1,366 x 768 pixels (Input signals that exceed this resolution will be converted to 1,366 x 768 pixels.)
Scanning frequency	SDI	SD-SDI	SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i, 576i		-
		HD-SDI	SMPTE ST 292 compliant, [YCBCR 4:2:2 10-bit] 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p		-
		Dual-link HD-SDI	SMPTE ST 372 compliant, [RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, [X´Y´Z´ 4:4:4 12-bit] 2,048 x 1,080/24p, 2,048 x 1,080/24sF		-
		3G-SDI	SMPTE ST 424 compliant, [YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p, [RGB 4:4:4 12-bit /10-bit]1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p		-
	HDMI/DVI-D		480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x 480)–WUXGA*⁴ (1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25–162 MHz
	RGB		fH: 15–100 kHz, fV: 24–120 Hz, dot clock: 20–162 MHz
	YPBPR (YCBCR)		fH: 15.75 kHz, fV: 60 Hz [480i (525i)] fH: 15.63 kHz, fV: 50 Hz [576i (625i)] fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p] fH: 33.75 kHz, fV: 60 Hz [1035/60i] fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i] fH: 27.00 kHz, fV: 24 Hz [1080/24p] fH: 33.75 kHz, fV: 30 Hz [1080/30p] fH: 56.25 kHz, fV: 50 Hz [1080/50p] fH: 31.50 kHz, fV: 60 Hz [480p (525p)] fH: 31.25 kHz, fV: 50 Hz [576p (625p)] fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p] fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i] fH: 28.13 kHz, fV: 25 Hz [1080/25p] fH: 27.00 kHz, fV: 48 Hz [1080/24sF] fH: 67.50 kHz, fV: 60 Hz [1080/60p]
	Video/Y/C		fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift*⁵	Vertical		±55 % (±44 % with the ET-D75LE6) from center of screen (powered)	±50 % (±40 % with the ET-D75LE6) from center of screen (powered)	±70 % (±60 % with the ET-D75LE6) from center of screen (powered)
Optical axis shift*⁵	Horizontal		±20 % (±15 % with the ET-D75LE6) from center of screen (powered)	±30 % (±20 % with the ET-D75LE6) from center of screen (powered)
Keystone correction range			Vertical: ±40°*⁶, horizontal: ±15°		Vertical: ±40°*⁶
Keystone correction range with optional Upgrade Kit			Vertical: ±45°⁶⁸, horizontal: ±40°⁷⁸		-
Installation			Ceiling/floor, front /rear
Terminals	SDI 1 IN		BNC x 1 (3G/HD/SD-SDI)		-
	SDI 2 IN		BNC x 1 (HD/SD-SDI)		-
	3D SYNC IN/OUT		BNC x 1 (3D timing signal)		-
	3D SYNC OUT		BNC x 1 (3D timing signal)		-
	DVI-D IN		DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
	HDMI IN		HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
	RGB 1 IN		BNC x 5 (RGB/YPBPR/YCBCR/YC x 1)
	RGB 2 IN		D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
	VIDEO IN		BNC x 1 (composite video)
	SERIAL IN		D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
	SERIAL OUT		D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
	REMOTE 1 IN		M3 x 1 for wired remote control
	REMOTE 1 OUT		M3 x 1 for link control (for wired remote control)
	REMOTE 2 IN		D-sub 9-pin (female) x 1 for external control (parallel)
	LAN		RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
Cabinet materials			Molded plastic
Dimensions (W x H x D)			620 x 291⁹ x 800 mm (24-7/16" x 11-15/32"⁹ x 31-1/2") (optional lens not included)
Weight*¹⁰			Approximately 43 kg (94.8 lbs) (optional lens not included)
Shipping dimensions (W x H x D)	PT-DZ21KU / DS20KU / DW17KU PT-DZ21KEJ / DS20KEJ / DW17KEJ		965 x 418 x 865 mm (38" x 16-15/32" x 34-1/16")
Shipping dimensions (W x H x D)	PT-DZ21KE / DS20KE / DW17KE		946 x 402 x 846 mm (38" x 15-13/16" x 33-5/16")
Shipping weight	PT-DZ21KU / DS20KU / DW17KU		53 kg (116.8 lbs)
	PT-DZ21KEJ / DS20KEJ / DW17KEJ		54 kg (119.0 lbs)
	PT-DZ21KE / DS20KE / DW17KE		51 kg (112.4 lbs)
Operation noise*³			49 dB (quad lamp operation)
Operating environment			Operating temperature: 0–45°C (32–113°F)*¹¹, operating humidity: 10– 80 % (no condensation)
Applicable software			Logo Transfer Software, Multi Projector Monitoring & Control Software, Geometry Manager Pro (included in the ET-UK20)		Logo Transfer Software, Multi Projector Monitoring & Control Software
Supplied accessories			Power cord with secure lock, wireless/wired remote control unit, batteries (R6/AA type x 2)

* Product numbers vary depending on the market. The general guideline is as follows: The product number in North America and Taiwan is
PT-DZ21KU, PT-DS20KU, and PT-DW17KU. The product number in Europe (except for those shipped directly to Europe), CIS, Asia (except Taiwan),
Oceania, Middle East, and Africa is PT-DZ21KE, PT-DS20KE, and PT-DW17KE.
The product number for the direct shipments to Europe is PT-DZ21KEJ, PT-DS20KEJ, and PT-DW17KEJ.
*1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
*2 The usage environment affects the lamp replacement cycle.
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*5 Optical axis shift cannot be operated with the ET-D75LE50.
*6 ±22° with the ET-D75LE50, ±28° with the ET-D75LE6, and ±40° with the ET-D75LE10 and ET-D75LE20.
*7 Up to ±15° with the ET-D75LE50 and ET-D75LE6.
*8 Up to a total of ±55° during simultaneous horizontal and vertical correction.
*9 With legs at shortest position.
*10 Average value. May differ depending on the actual unit.
*11 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ET-SFR510 Smoke Cut Filter, the operating temperature range is 0 °C to 35 °C (32 °F to 95 °F), and the projector cannot be used in places at high altitude. The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the ET-LAD510P/LAD510PF lamp is mounted and the projector is used in portrait configuration. The operating temperature range is 0 °C to 35 °C (32 °F to 95 °F) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ET-SFR510 Smoke Cut Filter, the operating temperature range is 0 °C to 30 °C (32 °F to 86 °F).

NOTES ON USE: 1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or electric shock.; 2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use.; 3. The projector uses of high-wattage lamp that becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is operation.
• Make sure there is an unobstructed space of 500 mm (19-11/16 inches) or more around the projector’s exhaust openings.
• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, temperature of the air surrounding the projector must be between 0 °C (32 °F) and 35 °C ( 95 °F). Also make sure the projector’s intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake.; 4. If the projector is to be operated continuously 24 hours a day / 7 days a week, use the multi-lamp optical system’s alternating lamp operation (lamp changer) function. The projector can be operated continuously 24 hours a day / 7 days a week in four-lamp operation mode, but it will automatically operate with three lamps for 8 hours of the 24 hours / 7 days.; 5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.; 6. Because the ET-D75LE50 is a fixed short-throw lens, the lens shift function cannot be used with it.; 7. Due to natural characteristics of lamps, screen brightness may vary (flicker). This is not an indication of faulty lamp performance.

Fényerő
10000 lm felett	20000 lm
Kontraszt
5 000:1 - 10 000 :1	10000:1
Felbontás (pixel)
1400 x 1050 SXGA+	ige
Csatlakozások
HDMI	igen
LAN	igen
Szín
Fekete	igen
Extra funkciók
3D	igen

Vélemények (0) Facebook Kommentek Kérdezz felelek

Írja meg véleményét

Az Ön neve:

Az Ön véleménye: Megjegyzés: A HTML-kód használata nem engedélyezett!

Értékelés: Rossz Kitűnő

Másolja be a lenti kódot: