PANASONIC PT-EX12K LCD rendszer projektor

13000 lm, XGA, WIRED LAN, 4000:1 kontraszt

4.082.143 Ft

Nettó: 3.214.286 Ft

Kiszállítás: 5 nap
Szállítási költség: 1905 Ft (1500+áfa)

2 év garancia

Kívánságlistához adom

Összehasonlításhoz adom

0 vélemény | Írja meg véleményét

Boltonkénti készlet

1116 Budapest, Kalotaszeg u. 28.

Hitel lehetőség

Csomag ajánlat

Szállítási infok, árak

Fizetési módok

Árváltozás értesítő

Leírás Tulajdonságok (7)

Model

PT-EX16K

PT-EX12K

Power supply

200-240 V AC, 50/60 Hz

100-240 V AC, 50/60 Hz

Power consumption

1,850 W (18 W with standby mode)

940 W (17 W with standby mode)

LCD panel

Panel size

46 mm (1.8 inches) diagonal (4:3 aspect ratio)

Display method

Transparent LCD panel (x 3, R/G/B)

Pixels

786,432 (1,024 x 768) x 3, total of 2,359,296 pixels

Pixel configuration

Stripe

Pure color control device

Lens

Optional

Lamp

380 W x 4, lamp replacement cycle
(lamp power: Normal/Eco1, Eco2):
2,000 hours/3,000 hours*¹

380 W x 2, lamp replacement cycle
(lamp power: Normal/Eco1, Eco2):
2,000 hours/3,000 hours*¹

Screen size (diagonal)

1.02–15.24 m (40–600 inches) (2.54–15.24 m [100–600 inches] with the ET-ELS03),
4:3 aspect ratio

Brightness*²

16,000 lm (4-lamps, lamp power: Auto/Normal, Optional lens: ET-ELS03)

13,000 lm (2-lamps, lamp power: Auto/Normal, Optional lens: ET-ELS03)

Center-to-corner uniformity*²

90 %

Contrast*²

2,500:1
(full on/full off, 4-lamps, lamp power: Auto)

4,000:1
(full on/full off, 2-lamps, lamp power: Auto)

Resolution

1,024 x 768 pixels
(Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.)

Scanning
frequency

HDMI/DVI-D

Horizontal: 26–80 kHz, vertical: 23–85 Hz, dot clock: 162 MHz or lower

RGB (analog)

fH: 15–120 kHz, fV: 48–120 Hz, dot clock: 230 MHz or lower
(Signals exceeding the dot clock rate of 165 MHz are downsampled.)

YPBPR (YCBCR)

fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 28.13 kHz, fV: 50 Hz [1080/25sF]
fH: 27.00 kHz, fV: 48 Hz [1080/24sF]
fH: 33.75 kHz, fV: 60 Hz [1080/30sF]
fH: 56.25 kHz, fV: 50 Hz [1080/50p]

fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080/25p]
fH: 27.00 kHz, fV: 24 Hz [1080/24p]
fH: 33.75 kHz, fV: 30 Hz [1080/30p]
fH: 67.50 kHz, fV: 60 Hz [1080/60p]

Video/S-Video

fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]

Optical axis shift

With the ET-ELW06: vertical ±39% from center of screen (powered)*³
With the ET-ELW02/ELW04/ELS03/ELM01/ELT02/ELT03: vertical ±39%, horizontal ±10% from center of screen (powered)
With the ET-ELS02: vertical ±50%, horizontal ±10% from center of screen (powered)
With the ET-ELW03: the optical lens shift function cannot be used.

Keystone correction range

Vertical: Maximum ±40°, Horizontal: Maximum ±40°
(with XGA signal input, for vertical/horizontal correction only, Optional lens: ET-ELS03)

Installation

Ceiling/floor, front/rear

Terminals

INPUT1

DVI-D IN

DVI-D 24-pin x 1
(DVI 1.0 compliant, compatible with HDCP, compatible with single link only), 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1035/60i, 1080/24p, 1080/24sF, 1080/25p, 1080/25sF, 1080/30p, 1080/30sF, 1080/60p, 1080/50p, VGA (640 x 480)–WUXGA (1,920 x 1,200)*⁴,
compatible with non-interlaced signals only, dot clock: 25–162 MHz

HDMI IN

HDMI 19-pin x 1
(compatible with HDCP, compatible with Deep Color), 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1035/60i, 1080/24p, 1080/24sF, 1080/25p, 1080/25sF, 1080/30p, 1080/30sF, 1080/60p, 1080/50p, VGA (640 x 480)–WUXGA (1,920 x 1,200)*⁴,
compatible with non-interlaced signals only, dot clock: 25–162 MHz

ANALOG IN

D-sub HD 15-pin (female) x 1 (RGB x 1)

INPUT2

RGB 5BNC IN/
VIDEO IN

BNC x 5 (RGB/YPBPR/YCBCR x 1), shared with VIDEO IN (BNC x 1) (composite video)

S-VIDEO IN

Mini DIN 4-pin x 1 (S-Video)

INPUT3/INPUT4

Optional interface board slot, When the ET-MD16SD1 is installed,
	SERIAL IN (SDI IN 1/2): BNC x 2 (SD-SDI signal/single link HD-SDI signal)
		SD-SDI signal (YCBCR 4:2:2 10-BIT): 480i, 576i (SMPTE 259M-C compliant)
		Single-link HD-SDI signal (YPBPR 4:2:2 10-BIT): 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/25sF, 1080/24p, 1080/24sF, 1080/30p, 1080/30sF (SMPTE 292M compliant)
	SERIAL OUT (SDI OUT): BNC x 1 (active through)

SERIAL IN

D-sub 9-pin (male) x 1
for external control

D-sub 9-pin (female) x 1
for external control

SERIAL OUT

D-sub 9-pin (male) x 1 for link control

REMOTE IN

M3 Jack x 1 (for wired remote control)

LAN

RJ-45 x 1 (for network connection, 100Base-TX/10Base-T,
compliant with PJLink™ [class1])

USB

USB type-B (USB connector) x 1*⁵

Cabinet materials

Molded plastic

Dimensions (W x H x D)

650 x 349 x 815 mm
(25.6” x 13.7” x 32.1”)
(with legs at shortest position, optional lens not included)

538.5 x 268 x 757 mm
(21.2” x 10.6” x 29.8”)
(with legs at shortest position, optional lens not included)

Weight

Approximately 46.5 kg (102.5 lbs)
(optional lens not included)

Approximately 28 kg (61.7 lbs)
(optional lens not included)

Noise level

51 dB (lamp power: Normal/Eco2),
48 dB (lamp power: Eco1)

42 dB (lamp power: Normal/Eco2),
39 dB (lamp power: Eco1)

Operating temperature

5°C- 40°C [41°F-104°F] (less than 1,800 m [5,906 ft] above sea level),
5°C- 30°C [41°F-86°F] (between 1,800 m and 2,700 m [5,906 ft to 8,858 ft] above sea level)

0°C- 40°C [32°F-104°F] (less than 1,400 m [4,593 ft] above sea level),
0°C- 30°C [32°F-86°F] (between 1,400 m and 2,700 m [4,593 ft to 8,858 ft] above sea level)

Operating humidity

20–80 % (no condensation)

Supplied accessories

Power cord x 1 (x 2 for PT-EX16KE/EX12KE), power cord holder/power cord cover x 1set, wireless/wired remote control unit, batteries (AAA/R03/LR03 type x 2), VGA cable x 1,
software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software, Real Color Manager Pro.), lens attachment x 1set, lens lock lever fixing bracket x 1set, lightshielding plate x 3set, spacer x 1set, cable tie x 3

*1 The values given for the recommended lamp replacement cycles are maximum.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 The ET-ELW06 is equipped with only vertical optical axis shift.
*4 Compliant with VESA CVT-RB.
*5 This port is for use by service personnel only. The USB interface may not operate with all USB compatible equipment.

Caution: Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.

NOTES ON USE: 1 This product must not be used in residential areas.; 2 This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.; 3 The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping sound, or fail to illuminate, due to impact or extended use.; 4 The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 1,000 mm (39-3/8 in) or more around the projector’s exhaust openings.
• If stacking projector units, care must be taken to provide the recommended space between units. These space requirements also apply to installation
  where only one projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the operating temperature listed in the
  specifications table during use. Also, make sure the projector’s intake and exhaust openings are not blocked. Ensure there is sufficient ventilation to
  prevent hot air from the exhaust openings being recirculated into the intake opening.; 5 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.; 6 Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.

Fényerő
10000 lm felett	13000 lm
Kontraszt
5 000:1 alatt	4000:1
Felbontás (pixel)
1024 x 768, XGA	igen
Csatlakozások
HDMI	igen
USB	igen
WLAN	igen
Szín
Fekete	igen

Vélemények (0) Facebook Kommentek Kérdezz felelek

Írja meg véleményét

Az Ön neve:

Az Ön véleménye: Megjegyzés: A HTML-kód használata nem engedélyezett!

Értékelés: Rossz Kitűnő

Másolja be a lenti kódot:

Küldés

Tegye fel kérdését Nekünk!

Az Ön neve:

E-mail címe:

Telefonszáma:

Az Ön kérdése:

Megjegyzés: A HTML-kód használata nem engedélyezett!

Másolja be a lenti kódot:

Küldés

PANASONIC PT-EX12K LCD rendszer projektor

Szolgáltatások

Kapcsolat

Aktuális

Általános információ

* Név:
* E-mail cím:
* Kívánt ár: