Webáruház > Hordozható projektor > Hordozható projektor
Kategória
Gyártók
Keresett ár: tól-ig
0 Ft 1.307.356 Ft
0 Ft 1.307.356 Ft

PANASONIC PT-VX42Z Hordozható projektor

Hordozható projektor

Hordozható LCD projektor, Fényerő 4000 lm, felbontás :XGA,

284.990 Ft
Nettó: 224.402 Ft
Kiszállítás: 5 nap
Szállítási költség: 1905 Ft (1500+áfa)
2 év garancia
Kívánságlistához adom
Összehasonlításhoz adom
Boltonkénti készlet
  • 1116 Budapest, Kalotaszeg u. 28.
Árváltozás értesítő
×

Tájékoztatjuk, ha a termék ára az Ön által kitűzött ár alá került.

* Név:
* E-mail cím:
* Kívánt ár:
Küldés
Model PT-VX415NZ PT-VX410Z PT-VX42Z
Power supply 100-240 V AC, 50/60 Hz
Power consumption 100-120 V AC: 300 W,
220-240 V AC: 280 W
(0.4 W when STANDBY MODE
set to ECO,*1
5 W when STANDBY MODE
set to Network,
14 W when STANDBY MODE
set to Normal.)		 100-120 V AC: 300 W, 220-240 V AC: 280 W
(0.4 W when STANDBY MODE set to ECO,*1
1.3 W when STANDBY MODE set to Network,
9 W when STANDBY MODE set to Normal.)
LCD panel Panel size 16.0 mm (0.63 in) (4:3 aspect ratio)
Display method Transparent LCD panel (x 3, R/G/B)
Pixels 786,432 (1,024 x 768) x 3, total of 2,359,296 pixels
Lens 1.6x manual zoom (throw ratio: 1.2-1.9:1),
manual focus, F 1.60-2.12, f 15.30-24.64 mm		 1.2x manual zoom
(throw ratio: 1.7-2.1:1),
manual focus, F 1.60-1.76,
f 22.33-26.80 mm
Lamp 230 W x 1,
lamp replacement cycle (lamp power: Normal/Eco1/Eco2): 4,000 hours/5,000 hours/6,000 hours*2
Screen size (diagonal) 0.76-7.62 m (30-300 in), 4:3 aspect ratio 1.02-7.62 m (40-300 in),
4:3 aspect ratio
Brightness*3 4,200 lm
(input signals: PC, lamp power: Normal, picture mode: Dynamic)		 4,000 lm
(input signals: PC,
lamp power: Normal,
picture mode: Dynamic)
Center-to-corner uniformity*3 85 %
Contrast*3 4,000:1 (full on/off)
(input signals: PC, lamp power: Normal, picture mode: Dynamic, IRIS: On)
Resolution 1,024 x 768 pixels*4
Scanning frequency HDMI fH: 15-80 kHz, fV: 50-85 Hz, dot clock: 162 MHz or lower
RGB (analog) fH: 15-100 kHz, fV: 50-100 Hz, dot clock: 162 MHz or lower
(Signals exceeding the dot clock rate of 140 MHz are downsampled.)
YPBPR (YCBCR)
fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift 9:1 (fixed)
Keystone correction range Vertical: ±40°
(±30° when using Easy Setting)
(maximum value of XGA input),
horizontal: ±30°
(±20° when using Easy Setting)
(maximum value of XGA input)		 Vertical: ±40°
(±30° when using AUTO)
(maximum value of XGA input),
horizontal: ±30°
(maximum value of XGA input)		 Vertical: ±30°
(±20° when using AUTO)
(maximum value of XGA input)
Installation Ceiling/floor, front/rear
Terminals HDMI IN HDMI 19-pin x 1 (compatible with HDCP, Deep Color)
480i*5, 480p, 576i*5, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i,
1080/25p, 1080/24p, 1080/24sF, 1080/30p,
1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200),*6
audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
COMPUTER 1 IN D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
COMPUTER 2 IN /
MONITOR OUT		 D-sub HD 15-pin (female) x 1 (RGB x 1), (input/output selectable using on-screen menu)
VIDEO IN Pin jack x 1 (Composite VIDEO)
S-VIDEO IN Mini DIN 4-pin x 1 (S-VIDEO)
AUDIO 1 IN M3 x 1 (L-R x 1)
AUDIO 2 IN
(MIC IN)		 M3 x 1 (L-R x 1) for audio input or for microphone connection (variable)
AUDIO 3 IN Pin jack x 2 (L, R x 1)
AUDIO OUT M3 x 1 (L-R x 1) for output (variable)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
LAN RJ-45 x 1
(for network connection, 10BASE-T/100BASE-TX, compliant with PJLink™)
USB A USB type-A
(for the USB Memory Viewer) x 1		 -
USB B USB type-B
(for the USB Display) x 1		 -
Built-in speaker 4.0 cm (1-9/16 in) round shape x 1, output power: 10.0 W (monaural)
Noise level*3 35 dB (lamp power: Normal), 29 dB (lamp power: Eco1, Eco2)
Cabinet materials Molded plastic
Dimensions (W x H x D) 352 x 98.0*7 x 279.4*8 mm (13-27/32 x 3-27/32*7 x 11*8 in) 352 x 98.0*7 x 255*8 mm
(13-27/32 x 3-27/32*7
x 10-1/32*8 in)
Weight*9 Approx. 3.4 kg (7.5 lbs) Approx. 3.3 kg (7.3 lbs) Approx. 3.2 kg (7.1 lbs)
Operating temperature 0°C-40°C [32°F-104°F]
(less than 1,400 m [4,593 ft] above sea level, HIGH ALTITUDE MODE: OFF),
0°C-30°C [32°F-86°F]
(between 1,400 m and 2,000 m [4,593 ft and 6,562 ft] above sea level,
HIGH ALTITUDE MODE: HIGH 1),
0°C-30°C [32°F-86°F]
(between 2,000 m and 2,700 m [6,562 ft and 8,858 ft] above sea level,
HIGH ALTITUDE MODE: HIGH 2)
Operating humidity 10-80 % (no condensation)
Wireless Standard 2.4 GHz: IEEE802.11b/g/n,
5.0 GHz: IEEE802.11a/n		 -
Infrastructure
mode		 WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES),
128 bit/64 bit WEP,
WPA-EAP/WPA2-EAP
(PEAP [MS-CHAPv2/GTC],
EAP-FAST [MS-CHAPv2/GTC],
EAP-TTLS [MD5/MS-CHAPv2])
128bit/64bit		 -
Supplied accessories Power cord x 1*10, wireless remote control unit x 1,
batteries (AAA/R03/LR03 type x 2), computer cable x 1,
Software CD-ROM
(Logo Transfer Software,
Multi Projector Monitoring &
Control Software,
Wireless Manager ME 6.0)		 Software CD-ROM
(Logo Transfer Software,
Multi Projector Monitoring &
Control Software)
*1
When the Standby mode is set to Eco, network functions such as power on over the LAN network will not operate.
Also, only certain commandscan be received for external control using the serial terminal.
*2
This is the maximum value when the lamp is turned on for 2 hours and off for 0.25 hours. If the lamp is turned on more times or kept on for a long time,
the lamp replacement cycle will shorten. The usage environment affects the duration of the lamp.
*3
Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4
Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.
*5
Only compatible with dot clock frequency of 27 MHz (pixel repetition signal).
*6
Compliant with VESA CVT-RB.
*7
With legs at shortest position.
*8
Including protruding parts.
*9
The above values are averages. Actual values may be different according to the product.
*10
Power cords available (x 2) for the UK and Asia only.
Caution

Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.

NOTES ON USE
1 The projector uses a high-voltage mercury lamp under high internal pressure.
This lamp may break, emitting a popping sound, or fail to illuminate, due to impact or extended use.
2 The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 1,000 mm (39-3/8 in) or more around the projector’s exhaust openings.
• If stacking projector units, care must be taken to provide the recommended space between units. These space requirements also apply to installation 
  where only one projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the operating temperature listed in the
  specifications table during use. Also, make sure the projector’s intake and exhaust openings are not blocked. Ensure there is sufficient ventilation to
  prevent hot air from the exhaust openings being recirculated into the intake opening.
3 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
4 Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.
Fényerő
3001-4000 lm 4000 lm
Kontraszt
5 000:1 alatt 4000:1
Felbontás (pixel)
1024 x 768, XGA igen
Csatlakozások
HDMI igen
Írja meg véleményét
Az Ön neve:


Az Ön véleménye: Megjegyzés: A HTML-kód használata nem engedélyezett!

Értékelés: Rossz            Kitűnő

Másolja be a lenti kódot:



Küldés
Tegye fel kérdését Nekünk!
Megjegyzés: A HTML-kód használata nem engedélyezett!
Küldés
© 2015-2024 Panashop - Videopart Minden jog fenntartva.